Dogging & CN Crane
CPCCLDG3001A - LICENCE TO PERFORM DOGGING
TLILIC0008 - LICENCE TO OPERATE A NON-SLEWING MOBILE CRANE (GREATER THAN 3 TONNES CAPACITY)
COURSE FEE: $1,650
CTF FUNDED COURSE – FILL IN OUR CTF FORM HERE & WE’LL HELP YOU CHECK YOUR ELIGIBILITY.
- Financial refunds apply to successful students/applicants who meet the CTF requirements.
- Saferight would like to thank CTF for funding support for construction industry workers.
- There will be a price adjustment from the first week of July 2021.
- No further discounts apply to any combination courses.
UNIT OF COMPETENCY
CPCCLDG3001A – Licence to perform dogging
TLILIC0008 – Licence to Operate a Non-Slewing Mobile Crane (Greater than 3 Tonnes Capacity)
SUMMARY: DOGGING COURSE
This Dogman Ticket / Dogging course is for students for are looking to acquire the necessary licence to work in the mines or construction industry. This unit specifies the outcomes required to perform slinging techniques, including the selection and inspection of lifting gear and/or the directing of the crane operator in the movement of the load when the load is out of view of the crane/operator for licensing purposes.
Students will attain the practical application to perform dogging properly and will be able to:
● Obtain site information and elements related to the task.
● Identify hazards and potential hazards associated with the slinging and directing of loads.
● Ensure hazard control measures are consistent with appropriate standards are to ensure the safety of personnel and equipment.
● Identify and assess the weight, dimensions and centre of gravity of the load.
● Identify suitable lifting/slinging points on the load.
● Assess appropriate lifting equipment needs.
● Assess appropriate communication methods with crane / operators and other appropriate personnel.
● Obtain manufacturer’s specifications/information for special loads where necessary.
SUMMARY: NON-SLEWING MOBILE CRANE (GREATER THAN 3 TONNES CAPACITY)
This CN Non-Slewing Crane Licence / Non-Slewing Mobile Crane Course is aimed at those currently working or seeking work in operational roles in the mining and construction industries who are required to operate a CN Non-Slewing Mobile Crane. This unit specifies the skills and knowledge required to operate a non-slewing mobile crane with a Maximum Rated Capacity (MRC) exceeding 3 tonnes safely, in accordance with all relevant legislative responsibilities.
Students will attain the practical application and understanding required to safely and efficiently operate a CN Non-Slewing Mobile Crane and will be able to:
- Non-slewing mobile crane rated capacity (RC) and the lifting gear Working Load Limit (WLL) are established for the load/s and work/task requirements in accordance with manufacturer requirements and workplace procedures
- Appropriate paths for operating the mobile crane and moving and placing load/s in work area are assessed and determined in accordance with workplace procedures
- Appropriate communication procedures are identified and tested with associated personnel in accordance with workplace procedures
- Non-slewing mobile crane is accessed safely in accordance with manufacturer requirements and safe work procedures
- Pre-start crane checks are carried out and any damage and defects are reported, recorded and appropriate action is taken in accordance with manufacturer requirements and safe work procedures
- Mobile crane is set up correctly with any lifting gear as per the lift plan in accordance with relevant manufacturer requirements including load chart/s and safe work procedures
- Fly jib (if fitted) is set up as required in accordance with specific manufacturer requirements and safe work procedures
- Crane logbook is checked to confirm current compliance, is correct for the crane type, is completed and signed and required rectifications have been signed off in accordance with manufacturer requirements and safe work procedures
- Boom/jib and hook block is safely positioned over the load following directions from associated personnel in accordance with the lift plan and safe work procedures
- Must be 18 years old and above
- Ability to read, write and understand English
- Present photo I.D. on arrival
- Complete a ‘Fitness to Complete Training’ form. The student is required to declare any medical issue that may exclude them from full participation
- Wear steel cap shoes/boots and remove all jewellery prior to commencement
- Theory Assessment
- Practical Assessment
CERTIFICATION: DOGMAN TICKET
On successful completion of this Dogman Ticket course, students will receive a Nationally Recognised Statement of Attainment for:
- CPCCLDG3001A – Licence to perform dogging
- TLILIC0008 – Licence to Operate a Non-Slewing Mobile Crane (Greater than 3 Tonnes Capacity)
The Unique Student Identifier (USI) must be supplied and verified prior to issuance.
NEW HIGH RISK WORK LICENCE/ADD NEW CLASS(ES) TO EXISTING HIGH RISK WORK LICENCE
A High Risk Work Licence is a photographic licence, issued to people who have been trained and assessed as competent to work in a class of work defined as high-risk work.
If you wish for Saferight to assist and make arrangements for you from start to end, please make an online payment by clicking the week your training falls in.
Whether you already have an existing High Risk Work Licence for a particular class and wish to add these 2 new classes or are applying for a new High Risk Work Licence from scratch, Saferight can assist and make arrangements for you from start to end.
Your enrolment will then be attached to this additional request from you for us to prepare the necessary documents for your High Risk Work Licence.
After you’ve completed your training with us at and have been assessed by a WorkSafe Registered Assessor here at Saferight, we will go through the steps with you to complete all the necessary paperwork for your WorkSafe High Risk Licence.
Note: Saferight can process your High Risk Work Licence application if you’ve enrolled on a course with us.
GROUP BOOKINGS/ONSITE TRAINING
107 Radium Street, Welshpool, WA 6106
Saferight has implemented a fee protection policy under the Standards for NVR Registered Training Organisations 2015. Click here for more information.
- For full payment for courses below $1500, students must pay the full fee prior to commencement of the course.
- For training courses over $1500,
- Saferight will hold an initial deposit of $1500 to secure the seat.
- Training Day 1- Students will be charged the outstanding balance and capped at $1500.
- Training Day 3 – Any further outstanding balance will be charged and capped at $1500.