The Tether Plate is Travel Restraint and Fall Arrest device on metal clad roofs. It can be used as a standalone diversionary roof anchor or it can be used in conjunction with the T Bar roof anchor. This device gives the operator the advantage of a 360° working area on the roof surface with continuous Travel Restraint protection.
The tether plate is a diversionary anchor point used for travel restraint application. The Claw 280MM & Claw 500MM can be used on metal clad roofs fixing directly to the metal surface with a minimum of four ASNZ1891.4 recommended roof screws.
Note: The Claw 280MM & Claw 500MM tether plate is not fitted with an internal energy absorbing device. An energy absorbing device must be used in conjunction with this tether plate.
This tether plate is suitable for:
– Use on roofs constructed with metal roof sheeting with a minimum base metal thickness of 0.42mm in Custom Orb
– Use in working at heights in normal climatic conditions
– 360 degree roof work
– Direct connection of personal fall-arrest equipment for a single person
For all product customisation, please email firstname.lastname@example.org